DS18 XOHV Pre-Amp With Crossover For High Volt Amplifier 2-Channel Bass Boost

DS18 XOHV PRE-AMP WITH CROSSOVER FOR HIGH VOLT AMPLIFIER 2-CHANNEL BASS BOOST

ncrease your systems signal to line-level with DS18’s XOHV!

This 2-channel Pre-Amplifier has a built-in Crossover and selectable bass boost frequency with high volt input and output! The XOHV is designed to work in line with H-V amplifiers that usually don’t have these features equipped.

This Pre-Amplifier’s 2-Channel capabilities allow you to connect 2 or more amplifiers for insane results!

Increase your signal strength today with the XOHV!

Highlights

• Perfect for Hi-Volts Amplifiers
• Hi-Volt RCA Input and output up to 9 volts
• Bass Boost adjustable on frequency and intensity
• LED Clip indicator for input and output
• Input Gain Adjustable
• Low Loss Tiffany RCA
• Remote output with delay to avoid noises
• Input Ground Selectable (Ground/200 ohm/Insulated)

Specifications

• Frequency Response / 15Hz – 20KHz
• Signal to Noise Ratio / 100 dB
• Total Harmonic Distortion (THD) / 0.02 %
• Stereo Signal Separation / 85dB
• Low Level Input Range / 1.6 – 9 Volts
• High Pass Filter Range / 15Hz – 10 KHz
• Low Pass Filter Range / 50Hz – 20 KHz
• Crossover Slope / 12dB/Oct
• Bass Boost Range / 0~18dB
• Bass Boost Frequency / 35~125Hz
• RCA Pre-Output Voltage at 12.8V / 7 Volts
• RCA Pre-Output Voltage at 14.4V / 9 Volts
• Number of Channels / 2 (Left and Right)
• Led Indicator / Power / Clip
• Power Input Terminal Size / 14 Ga
• Recommended Fuse Size / up to 1A (external)
• Remote Output / Yes, (250mA)
• Tiffany RCA / Yes, (Input and Output)
• Input Ground Selector / Yes, (Ground/200 OHM/Insolated)

Measurement

• Overall Length / 5.9″ / 150mm
• Overall Width / 3.28″ / 83.5mm
• Overall Depth / 1.1″ / 28mm
• Body Length / 4.86″ / 123.5mm
• Body Width / 2.42″ / 61.7mm
• Gross Single Unit Weight / 9.4oz